A standard credit card size is 85.60 mm × 53.98 mm (3.370 × 2.125 inches, or 8.56 × 5.40 cm), 0.76 mm thick, with rounded corners of about 3.18 mm. Every credit card, debit card, driver’s license and most ID cards use this exact size, set by the ISO/IEC 7810 ID-1 standard. That makes a card the most reliable object for calibrating an actual size ruler on a screen.
Below are exact sizes for cards and other everyday reference objects (banknotes, coins and paper), how accurate each one is, and how to use them with the ruler on phone.
How big is a credit card?
| Measurement | Metric | Imperial |
|---|---|---|
| Width (long edge) | 85.60 mm (8.560 cm) | 3.370 in |
| Height (short edge) | 53.98 mm (5.398 cm) | 2.125 in |
| Thickness | 0.76 mm | 0.030 in |
| Corner radius | ≈ 3.18 mm | ≈ 0.125 in |
| Diagonal | ≈ 101.2 mm | ≈ 3.98 in |
| Area | ≈ 46.2 cm² | ≈ 7.16 in² |
The ratio is about 1.586:1. That’s why cards look slightly wider than a 3:2 photo, and close to (but not exactly) the golden ratio of 1.618.
The metric and imperial figures match: 3.370 in × 25.4 = 85.598 mm and 2.125 in × 25.4 = 53.975 mm, which round to the 85.60 × 53.98 mm in the standard.
How much can a real card differ?
ISO/IEC 7810 allows small manufacturing tolerances, so a real card can be a fraction of a millimeter off the nominal size. In practice the difference is far smaller than the width of a tick on a screen ruler. Worn or bent cards matter more: a card that has curled in a wallet won’t lie flat on the glass, and that gap causes more error than any tolerance in the standard.
Is every card the same size? The ID-1, ID-2 and ID-3 formats
ISO/IEC 7810 defines a family of card sizes. Most cards you carry are ID-1, but a few documents use the larger formats.
| Format | Size (mm) | Size (in) | Typical uses |
|---|---|---|---|
| ID-1 | 85.60 × 53.98 | 3.370 × 2.125 | Credit and debit cards, driver’s licenses, most national ID cards, transit cards, gift cards, hotel key cards |
| ID-2 | 105 × 74 | 4.13 × 2.91 | Some older ID cards and visas |
| ID-3 | 125 × 88 | 4.92 × 3.46 | Passport data pages |
| ID-000 | 25 × 15 | 0.98 × 0.59 | Full-size SIM card (the card the nano-SIM pops out of is ID-1) |
Cards that look different but share the ID-1 outline:
- Vertical cards. Many banks now print cards in portrait orientation. The outline is still 85.60 × 53.98 mm, just rotated.
- Metal cards. Heavier and sometimes slightly thicker, but the same width and height.
- Driver’s licenses and ID cards in the US, EU, UK, Canada, Australia and most other countries.
- Loyalty, gift, library and hotel key cards. Usually ID-1, but cheap promotional cards are sometimes cut less precisely. If you have a choice, use a bank card.
Not ID-1: business cards (see below), membership cards with a key-tag shape, and mini “key fob” cards.
Other reference objects with exact sizes
If you don’t have a card to hand, these objects also have published sizes.
Coins
Coins are made to tight tolerances, so they are good for checking small measurements. Sizes come from the issuing mints.
| Coin | Diameter (mm) | Diameter (in) |
|---|---|---|
| US penny (1¢) | 19.05 | 0.750 |
| US nickel (5¢) | 21.21 | 0.835 |
| US dime (10¢) | 17.91 | 0.705 |
| US quarter (25¢) | 24.26 | 0.955 |
| US half dollar | 30.61 | 1.205 |
| US dollar coin | 26.49 | 1.043 |
| Euro 1 cent | 16.25 | 0.640 |
| Euro 10 cent | 19.75 | 0.778 |
| Euro 50 cent | 24.25 | 0.955 |
| Euro €1 | 23.25 | 0.915 |
| Euro €2 | 25.75 | 1.014 |
| UK 1p | 20.30 | 0.799 |
| UK 10p | 24.50 | 0.965 |
| UK £1 | 23.43 | 0.922 |
| UK £2 | 28.40 | 1.118 |
A coin’s diameter is short, so a one-pixel alignment error is a bigger share of the length. Coins are better for checking a calibration than for setting one.
Banknotes
| Note | Size (mm) | Size (in) | Notes |
|---|---|---|---|
| US dollar bill (any value) | 155.96 × 66.29 | 6.14 × 2.61 | All current US notes share this size |
| €5 | 120 × 62 | 4.72 × 2.44 | Euro notes grow with value |
| €10 | 127 × 67 | 5.00 × 2.64 | |
| €20 | 133 × 72 | 5.24 × 2.83 | |
| €50 | 140 × 77 | 5.51 × 3.03 | |
| €100 | 147 × 77 | 5.79 × 3.03 | Europa series |
Paper money stretches, shrinks and wears at the edges, so treat banknotes as a rough check (within about 1 mm), not a precise reference.
Paper and other everyday objects
| Object | Size (mm) | Size (in) | Notes |
|---|---|---|---|
| A4 paper | 210 × 297 | 8.27 × 11.69 | ISO 216. Too big for phones; good for tablets and monitors |
| US Letter paper | 215.9 × 279.4 | 8.5 × 11 | Standard in the US and Canada |
| US business card | 88.9 × 50.8 | 3.5 × 2 | Sizes vary by printer |
| EU business card | 85 × 55 | 3.35 × 2.17 | Common, not standardized |
| Nano-SIM | 12.3 × 8.8 | 0.48 × 0.35 | Very small; low precision |
| Standard sticky note | ≈ 76 × 76 | 3 × 3 | Cut sizes vary by brand |
For all A-series and US paper sizes, see A4 size in inches, mm and cm.
Which reference object is most accurate?
The best reference is long, rigid and exactly specified. The longer the edge, the smaller the effect of a one-pixel alignment error.
| Reference | Edge used | Error from a 1 px misalignment* | Verdict |
|---|---|---|---|
| Credit/ID card | 85.60 mm | ≈ 0.2% | Best for phones |
| A4 / Letter sheet | 210–297 mm | ≈ 0.06–0.08% | Best for tablets and monitors |
| US dollar bill | 155.96 mm | ≈ 0.1%, but paper varies | Good backup |
| Coin | 17–30 mm | ≈ 0.6–1% | Use to check, not to calibrate |
| Business card | ≈ 85–89 mm | Unknown; sizes vary | Avoid |
*Assumes about 6 CSS pixels per millimeter, which is typical for a modern phone. One pixel is about 0.17 mm.
In plain terms: a card calibration is accurate to about 0.2 mm over 10 cm if you line it up to the nearest pixel. That is better than most people can read a plastic ruler.
Why reference objects matter for an online ruler
A website can’t know how many pixels your screen packs into each inch. An iPhone 15 Pro has about 460 pixels per inch; a mid-range Android may have 400; a laptop could have 130. Browsers hide this behind “CSS pixels” and assume 96 per inch, which is wrong on almost every phone. Without a reference, an online ruler has to guess, and the guess is often 10–40% off. Our article on why online rulers are inaccurate explains this in detail.
A reference object removes the guesswork. You tell the ruler, “this card is 85.60 mm.” It then works out exactly how many screen pixels make one millimeter, and every tick after that is drawn at real size.
How to calibrate with a credit card
- Open the ruler on phone and set browser zoom to 100%.
- Open calibration and choose Card.
- Hold the card flat against the screen, with its long edge along the ruler. Start at the zero mark.
- Drag the overlay until its edge lines up with the far end of the card, then tap Apply.
- Check: the card’s end should sit exactly on the 85.6 mm tick, and its short edge on 54 mm if you turn it.
For other options (A4, Letter, custom length or screen diagonal), see the full calibration guide or the step-by-step calibration page.
Common mistakes when calibrating with a card
- Lining up the rounded corner. The corners are curved, so align with the straight part of the short edge, not the corner tip.
- Looking from an angle. The glass on a phone is about 1 mm thick, so the card sits slightly above the pixels. Look straight down at the edge to avoid parallax.
- Pressing on a curved screen. On phones with curved edges, keep the card on the flat middle of the display.
- Zooming after calibrating. Pinch zoom or a browser zoom change resizes everything. Return to 100% or recalibrate.
- Using a thick case lip. If a raised case edge stops the card lying flat, take the phone out of the case.
How to check your calibration
After calibrating, measure something else with a known size:
- Place a coin from the table above on the ruler. A US quarter should read 24.3 mm; a €1 coin 23.3 mm.
- If you have a sheet of A4 or Letter and a tablet, check the full width.
- If the check is off by more than about 0.5 mm, recalibrate more slowly, looking straight down.
Credit card size in pixels
Like paper, a card has no fixed pixel size; it depends on resolution. Pixels = inches × DPI, using 3.370 × 2.125 in.
| Resolution | Card size in pixels | Use |
|---|---|---|
| 72 DPI | 243 × 153 | PDF points, older mockups |
| 96 DPI | 324 × 204 | CSS pixels in a browser (nominal, not physical) |
| 150 DPI | 506 × 319 | Drafts and on-screen previews |
| 300 DPI | 1011 × 638 | Standard print quality |
| 600 DPI | 2022 × 1275 | High-quality print |
The 300 DPI size is the one most print shops ask for: 3.370 × 300 = 1011 and 2.125 × 300 = 637.5, rounded to 638. Many printers also want a bleed, artwork that extends past the cut line, often 1/8 in (3.175 mm) per side. With that bleed the file is 3.620 × 2.375 in, or 1086 × 713 pixels at 300 DPI. Bleed and safe-zone sizes differ between shops, so use your printer’s template.
A 324 × 204 CSS-pixel box is not what a real card looks like on a phone. Browsers assume 96 CSS pixels per inch, and phones don’t follow that, which is exactly why the ruler needs calibrating. See what is PPI for the background.
Credit card size in inches as fractions
| Side | Decimal | Fraction |
|---|---|---|
| Long edge | 3.370 in | 3 3/8 in (3.375, off by 0.005 in) |
| Short edge | 2.125 in | 2 1/8 in (exact) |
| Thickness | 0.030 in | just under 1/32 in |
The short edge is exactly 2 1/8 inches, so on an imperial ruler it lands precisely on a marked line. The long edge falls a hair (0.13 mm) short of 3 3/8.
How thick is a credit card?
ISO/IEC 7810 sets the ID-1 thickness at 0.76 mm (0.030 in). A few practical consequences:
- A stack of 13 cards is about 1 cm (13 × 0.76 = 9.88 mm), and a stack of 33 is about an inch (33 × 0.76 = 25.08 mm).
- Embossed cards are thicker at the raised numbers. The body is still 0.76 mm, but the raised characters add height, which is why embossed cards stack unevenly.
- Metal cards feel heavier and stiffer but are made to fit standard card slots and terminals, so their outline matches the standard.
That thickness is also why a card sits slightly above the screen when you calibrate. Look straight down at its edge, as described above.
Using a credit card as a ruler: worked examples
Because its edges are fixed by a standard, a card doubles as a pocket ruler when nothing else is to hand.
Is that gap wider than 5 cm? The short edge is 53.98 mm, about 5.4 cm. If the short edge fits across the gap with room to spare, the gap is wider than 5.4 cm.
Roughly how long is this shelf? Flip the card end over end along the long edge, counting. Each flip is 85.6 mm, so 12 flips is 12 × 85.6 = 1027 mm, just over 1 m. Errors add up with every flip, so expect a few millimeters of drift.
Does a small item fit in a card slot? Compare it with the card’s 53.98 mm short edge. An AirTag, for example, is 31.9 mm across according to Apple’s specifications, so it fits well within it.
Measuring something small precisely. Use the card to calibrate the ruler on phone, then measure the object directly on the screen. That’s far more precise than eyeballing it against the card. For rings, see how to measure ring size; for more household references, see how to measure without a ruler.
Troubleshooting a card calibration
| Symptom | Likely cause | Fix |
|---|---|---|
| Everything reads a few % too big or small | Browser zoom isn’t 100% | Reset zoom, then recalibrate |
| Right yesterday, wrong today | Display scaling, browser or device changed | Recalibrate; the setting is stored per browser and device |
| Card won’t sit at the zero mark | Case lip or curved screen edge | Remove the case; use the flat part of the screen |
| Coin check off by about 0.5 mm | Card edge misaligned by a pixel or two | Recalibrate slowly, looking straight down |
| Readings change after rotating | Layout changed with orientation | Calibrate in the orientation you’ll measure in |
If calibration keeps drifting, the calibration guide covers other references, such as a sheet of A4 or a known screen diagonal.
Privacy note
Calibration only uses the card’s outline. You can face the card down, use an expired card, or use a gift or loyalty card. The ruler never reads or stores card details, never uses the camera, and calibration data stays on your device.
Sources
- ISO/IEC 7810: Identification cards — Physical characteristics (ID-1, ID-2, ID-3, ID-000 formats).
- U.S. Mint coin specifications; U.S. Bureau of Engraving and Printing currency dimensions.
- European Central Bank, euro coin and banknote specifications; Royal Mint coin specifications.
- ISO 216 (A-series paper); ANSI/ASME Y14.1 (US Letter).