To measure TV size, measure the screen diagonally, from the top-left corner to the bottom-right corner, in inches. Measure only the visible picture area, not the frame (bezel). That diagonal is the size manufacturers advertise: a “55-inch TV” has a 55-inch diagonal, which on a 16:9 screen is 47.9 inches wide and 27 inches tall. The same rule applies to monitors, laptops, tablets and phones.
How to measure a screen size step by step
- Turn the screen off so the edges of the picture area are easy to see, or show a white image.
- Start at one corner of the visible screen, not the plastic or metal frame.
- Stretch a tape measure diagonally to the opposite corner. Keep it straight; don’t let it sag.
- Read the length in inches. If you measured in cm, divide by 2.54.
- Round to the nearest whole inch to get the class size.
Two people make this easier on large TVs. For safety, never press on an OLED or LCD panel with the tape, and don’t let a metal hook touch the screen.
No tape long enough? Measure width and height
If the diagonal is awkward to reach, measure the screen’s width and height and calculate it:
diagonal = √(width² + height²)
Example: a screen 47.9 in wide and 27.0 in tall: √(47.9² + 27.0²) = √(2294 + 729) = √3023 ≈ 55.0 inches.
Measuring the outside size for a wall, cabinet or box
For fitting a TV into a space, the screen size isn’t enough. You need the overall dimensions:
- Width and height with the frame. Measure outer edge to outer edge.
- Height with the stand, if it won’t be wall-mounted.
- Depth, including the stand’s feet.
- Stand footprint. Many TVs have feet near the ends, so the furniture must be nearly as wide as the TV.
The manufacturer’s spec sheet lists all of these. It’s the most reliable source if you’re buying online.
How to measure monitor size
Monitors are measured the same way: visible diagonal, no bezel. For buying a monitor arm or fitting a desk, you’ll also want the width and height. Use the charts below, or measure them directly.
Ultrawide monitors are much wider for the same diagonal. A 34-inch ultrawide (3440 × 1440) is about 31.4 × 13.1 inches, compared with 29.6 × 16.7 for a 16:9 34-inch screen. A 34-inch ultrawide has about the same height as a 27-inch 16:9 monitor.
VESA mount size: if you’re buying a wall mount or arm, also measure the distance between the four screw holes on the back, in millimeters (for example 100 × 100 or 400 × 400). That’s the VESA pattern, and it must match the mount.
TV size chart: width, height and viewing distance (16:9)
| TV size (diagonal) | Screen width | Screen height | Screen size in cm | Diagonal in cm | Viewing distance* |
|---|---|---|---|---|---|
| 24” | 20.9” | 11.8” | 53.1 × 29.9 cm | 61 cm | 2.4–3.3 ft |
| 32” | 27.9” | 15.7” | 70.8 × 39.8 cm | 81 cm | 3.2–4.3 ft |
| 40” | 34.9” | 19.6” | 88.6 × 49.8 cm | 102 cm | 4.0–5.4 ft |
| 43” | 37.5” | 21.1” | 95.2 × 53.5 cm | 109 cm | 4.3–5.8 ft |
| 50” | 43.6” | 24.5” | 110.7 × 62.3 cm | 127 cm | 5.0–6.8 ft |
| 55” | 47.9” | 27.0” | 121.8 × 68.5 cm | 140 cm | 5.5–7.5 ft |
| 65” | 56.7” | 31.9” | 143.9 × 80.9 cm | 165 cm | 6.5–8.8 ft |
| 70” | 61.0” | 34.3” | 155.0 × 87.2 cm | 178 cm | 7.0–9.5 ft |
| 75” | 65.4” | 36.8” | 166.0 × 93.4 cm | 190 cm | 7.5–10.2 ft |
| 77” | 67.1” | 37.8” | 170.5 × 95.9 cm | 196 cm | 7.7–10.5 ft |
| 83” | 72.3” | 40.7” | 183.7 × 103.4 cm | 211 cm | 8.3–11.3 ft |
| 85” | 74.1” | 41.7” | 188.2 × 105.8 cm | 216 cm | 8.5–11.5 ft |
| 98” | 85.4” | 48.0” | 217.0 × 122.0 cm | 249 cm | 9.8–13.3 ft |
| 100” | 87.2” | 49.0” | 221.4 × 124.5 cm | 254 cm | 10.0–13.6 ft |
These are screen sizes. Add 0.5–2 inches for the frame, and check the model’s spec sheet for exact dimensions with the stand.
*Viewing distance: the near figure is the THX recommendation (screen fills about 40° of your view, ≈ 1.2 × diagonal); the far figure is the SMPTE minimum of 30° (≈ 1.6 × diagonal). See below.
Formula for 16:9 screens: width = diagonal × 0.872, height = diagonal × 0.490.
Monitor, laptop and tablet size chart
Not every screen is 16:9. The aspect ratio changes the width and height for the same diagonal.
| Screen | Aspect ratio | Width | Height | In cm |
|---|---|---|---|---|
| 13” laptop (e.g. Surface) | 3:2 | 10.8” | 7.2” | 27.5 × 18.3 cm |
| 13.3” laptop | 16:9 | 11.6” | 6.5” | 29.4 × 16.6 cm |
| 13.6” laptop | 16:10 | 11.5” | 7.2” | 29.3 × 18.3 cm |
| 14” laptop | 16:10 | 11.9” | 7.4” | 30.2 × 18.8 cm |
| 15.6” laptop | 16:9 | 13.6” | 7.6” | 34.5 × 19.4 cm |
| 16” laptop | 16:10 | 13.6” | 8.5” | 34.5 × 21.5 cm |
| 11” tablet | 4:3 | 8.8” | 6.6” | 22.4 × 16.8 cm |
| 12.9” tablet | 4:3 | 10.3” | 7.7” | 26.2 × 19.7 cm |
| 24” monitor | 16:9 | 20.9” | 11.8” | 53.1 × 29.9 cm |
| 27” monitor | 16:9 | 23.5” | 13.2” | 59.8 × 33.6 cm |
| 32” monitor | 16:9 | 27.9” | 15.7” | 70.8 × 39.8 cm |
| 34” ultrawide (3440 × 1440) | ≈ 21:9 | 31.4” | 13.1” | 79.7 × 33.3 cm |
| 49” super ultrawide | 32:9 | 47.2” | 13.3” | 119.8 × 33.7 cm |
Many laptops now use 16:10 or 3:2 screens, which are a little taller for the same diagonal. Tablets sold as “11-inch” or “13-inch” may use slightly different ratios; check the model’s specs.
Formula for any aspect ratio a:b: width = diagonal × a ÷ √(a² + b²), height = diagonal × b ÷ √(a² + b²).
How to measure a phone or tablet screen
Phones are measured the same way, but the corners are rounded. Manufacturers measure the diagonal as if the corners were square, so a ruler held across a phone will read slightly less than the advertised size. Apple, for example, states that its screen sizes are measured “as a standard rectangle” and that the actual viewable area is less.
To check a phone’s width or height, use a ruler, or a calibrated ruler on another phone. To measure the screen of the phone you’re holding, a ruler drawn on that same screen can measure everything except its own edges, so use a second device or a physical ruler.
Screen size vs resolution vs PPI
- Screen size is physical: inches on the diagonal.
- Resolution is the pixel count, e.g. 3840 × 2160 (4K).
- PPI links the two: how many pixels fit in each inch.
| Screen | Resolution | PPI |
|---|---|---|
| 24” monitor | 1920 × 1080 | ≈ 92 |
| 27” monitor | 1920 × 1080 | ≈ 82 |
| 27” monitor | 2560 × 1440 | ≈ 109 |
| 27” monitor | 3840 × 2160 | ≈ 163 |
| 32” monitor | 3840 × 2160 | ≈ 138 |
| 55” TV | 3840 × 2160 | ≈ 80 |
| 65” TV | 3840 × 2160 | ≈ 68 |
Same pixels, spread over more area. PPI = √(width_px² + height_px²) ÷ diagonal in inches. Learn more in What is PPI?, and why browsers report a different “pixel” size in device pixel ratio explained.
Choosing the right TV size
Two industry guidelines are based on how much of your field of view the screen fills:
- SMPTE recommends the screen fill at least 30° of your view, which works out to a viewing distance of about 1.6 × the diagonal.
- THX recommends about 40° for a cinema-like experience, about 1.2 × the diagonal.
| You sit this far away | TV size range (16:9) |
|---|---|
| 5 ft (1.5 m) | 38–50” |
| 6 ft (1.8 m) | 45–60” |
| 7 ft (2.1 m) | 53–70” |
| 8 ft (2.4 m) | 60–80” |
| 9 ft (2.7 m) | 68–90” |
| 10 ft (3.0 m) | 75–100” |
Read the range as “the larger number if you want it immersive, the smaller if it’s for casual TV.” With 4K content you can sit closer without seeing pixels than with 1080p.
Before you buy: measure your wall, stand or cabinet width with a tape, and compare it with the TV’s overall width (frame included), not the screen width. A 65-inch TV needs about 58 inches of space; a 75-inch needs about 67.
Is a TV measured with or without the frame?
Without. The advertised size is always the diagonal of the picture area, so the bezel adds nothing to the number. This matters most on older or budget TVs with thick frames: two 55-inch TVs can differ in outside width by an inch or more while having exactly the same screen. If you are checking whether a TV fits a gap, measure the frame; if you are checking which size you own, measure the picture.
What does “class” mean in a TV size?
Retailers often write “55-inch class” or “65″ class”. The class is the size rounded to a whole number. The exact viewable diagonal (for example 54.6″ or 64.5″) is listed in the specifications, usually under “screen size (diagonal)” or “viewable size”. If your tape reads half an inch less than the class, the TV isn’t faulty; check the spec sheet before you assume something is wrong.
How to measure a TV screen in centimeters
Measure the same diagonal, read the tape in centimeters, then divide by 2.54 (1 inch = 2.54 cm exactly).
| Diagonal measured | ÷ 2.54 | TV size |
|---|---|---|
| 81.3 cm | 32.0” | 32-inch |
| 109.2 cm | 43.0” | 43-inch |
| 139.7 cm | 55.0” | 55-inch |
| 165.1 cm | 65.0” | 65-inch |
| 190.5 cm | 75.0” | 75-inch |
Many European and Asian retailers list both, for example “139 cm (55″)”. The cm figure is the same diagonal, just converted.
How to measure an old 4:3 TV
Older tube (CRT) and early flat TVs use a 4:3 picture, which is squarer. For 4:3, width = diagonal × 0.8 and height = diagonal × 0.6 (a 3-4-5 triangle). A 32-inch 4:3 TV is 25.6″ wide and 19.2″ tall, against 27.9″ × 15.7″ for a 32-inch 16:9 TV. On a CRT, measure the visible glass, not the plastic around it. CRT sizes were often quoted for the whole tube, so the viewable diagonal is commonly an inch or so smaller than the label.
How to measure a curved TV or monitor
Use a flexible tape and let it follow the surface from corner to corner, or measure width and height and use √(width² + height²). Either way, compare your number with the model’s spec sheet: on a strongly curved ultrawide, a tape pulled straight through the air between the corners reads slightly less than one laid along the screen, and manufacturers don’t all say which they use.
How to measure a TV for a wall mount
A wall mount must match three things, all printed on the TV’s spec sheet and usually on a label on the back:
- VESA pattern. The horizontal × vertical distance between the four threaded holes, center to center, in millimeters. Common patterns include 100 × 100, 200 × 200, 300 × 300, 400 × 400 and 600 × 400. Measure center to center, not edge to edge, or you will be off by one hole diameter.
- Weight. The mount’s rated load must exceed the TV’s weight without the stand.
- Screen size range. Mounts list a supported size range, for example 37–75″.
For small VESA patterns (75 × 75 or 100 × 100 mm on monitors), a calibrated ruler on your phone is long enough to check the spacing directly. Lay the phone flat on the back panel and read center to center. Calibrate first on the calibration page, since an uncalibrated browser ruler can be off by 30% or more; see why online rulers are inaccurate.
Where to hang it
Plan the height so the screen’s center is roughly at seated eye level. Measure from the floor to your eye height while seated, then use the screen height from the chart above: the bottom edge of the picture sits half a screen height below that point. For a 55-inch 16:9 TV, that’s 13.5″ (half of 27.0″) below eye level.
How much bigger is the next TV size?
Screen area grows with the square of the diagonal, so a small jump in inches is a big jump in picture.
| Upgrade | Area before | Area after | Increase |
|---|---|---|---|
| 43” → 50” | 791 sq in | 1,068 sq in | 35% |
| 50” → 55” | 1,068 sq in | 1,293 sq in | 21% |
| 55” → 65” | 1,293 sq in | 1,809 sq in | 40% |
| 65” → 75” | 1,809 sq in | 2,407 sq in | 33% |
| 75” → 85” | 2,407 sq in | 3,090 sq in | 28% |
Areas are width × height from the 16:9 chart. Formula: area ratio = (new diagonal ÷ old diagonal)².
Worked examples
“Will a 65-inch TV fit on a 60-inch console?” The screen is 56.7″ wide and most frames add 0.5–1.5″, so the TV is roughly 57–58″ wide. The width fits, but check where the feet sit; on some models they’re near the ends and need almost the full TV width.
“I measured 48 inches across. What size is my TV?” If it’s 16:9, divide width by 0.872: 48 ÷ 0.872 ≈ 55.0, so it’s a 55-inch TV. If you measured the frame, subtract the bezel first.
“My laptop screen measures 34.5 × 19.4 cm.” √(34.5² + 19.4²) = √(1190 + 376) = √1566 ≈ 39.6 cm, and 39.6 ÷ 2.54 ≈ 15.6 inches.
Troubleshooting your measurement
| Problem | Likely reason | What to do |
|---|---|---|
| Diagonal is 0.3–0.6″ below the class | Size rounded to a class | Check “viewable size” in the specs |
| Diagonal is 1–2″ too big | You measured to the frame | Measure only the picture area |
| Width and height don’t fit the formula | Different aspect ratio (16:10, 21:9, 4:3) | Use the a:b formula above |
| Numbers change between attempts | Tape sagging on a big screen | Use two people, or measure width and height |
| You can’t find the picture edge | Black borders on a dark panel | Display a white image first |
Common mistakes
- Including the bezel. The frame is never part of the advertised size.
- Measuring width instead of diagonal. A 55-inch TV is only 47.9 inches wide.
- Comparing different aspect ratios by diagonal. A 34-inch ultrawide has much less screen area than a 34-inch 16:9 screen.
- Forgetting the stand. It adds height and needs a wide enough surface.
- Converting cm wrongly. Divide cm by 2.54 for inches; see the mm to inches chart.
Sources
- SMPTE 30° minimum viewing-angle guidance and THX 40° viewing-angle recommendation.
- VESA Flat Display Mounting Interface (FDMI) standard (hole patterns in mm, center to center).
- 1 inch = 2.54 cm exactly (international yard and pound agreement, 1959).
- Manufacturer specification sheets for screen dimensions; Apple screen-size note on rounded corners.